Description
🎓 Lifting & Rigging Engineer Training — live online training from 3D-LABS, taught by practising design engineers who build the calculators and software used on EPC projects every day.
⏱ Duration: 4 weeks · 🕑 Schedule: 2 hrs/day, weekday or weekend batches · 📶 Level: Intermediate · 💻 Mode: Live online, every session recorded
👷 Who this course is for
Mechanical, structural and construction engineers who plan heavy lifts, and QA/QC or site engineers who have to review and approve a rigging study before it goes to the field.
📚 Course structure
- Lift engineering fundamentals — Load definition, dynamic amplification factors, consequence classes, and the difference between a routine, engineered and critical lift.
- Padeye and lifting lug design — Hole and cheek plate sizing, bearing and tear-out checks, weld design, and the Bechtel lug method worked end to end.
- Slings, shackles and rigging hardware — Sling angle effects, D/d ratio, working load limits and design factors, wire rope and synthetic sling selection, hardware certification.
- Spreader and lifting beam design — Beam sizing, lateral torsional buckling, trunnion checks, and when a spreader beats a straight sling arrangement.
- Crane selection and ground bearing — Load charts, radius and boom configuration, outrigger pressures, crane mats and allowable ground bearing pressure.
- Multi-crane and tandem lifts — Load sharing between cranes, synchronisation, tailing cranes, and what a tandem lift study must demonstrate.
- SPMT transport and strand jacking — Axle load distribution, route and grade checks, stability during transport, strand jack and skidding systems.
- Lift plan documentation — Rigging study drawings, calculation packs and method statements, and how a lift plan is reviewed and approved.
🧮 3D-LABS calculators and software you will use
Every module is taught against real design sheets from our library of 680+ engineering calculators and our in-house software (STR Master, FEA Master) — you keep access to them and can use them on the job from day one.
- Padeye and lifting lug design with cheek plates (Bechtel method)
- Spreader beam and lifting beam sizing
- Sling tension and sling angle load factors
- Crane outrigger load and ground bearing pressure
- Tandem and multi-crane load sharing
- SPMT axle load and route grade check
- Strand jack and skidding force calculation
- Tailing lug and upending analysis
🖥 Tools, codes and standards covered
ASME BTH-1, AISC 360, API RP 2A for offshore lifts, DNV-ST-N001 lifting appliance practice, LOLER and IS 3938 hardware requirements.
📦 What is included
- Certificate of completion issued by 3D-LABS
- Lifetime access to course notes and session recordings
- Working calculators and templates used in class
- A guided mini-project with reviewed deliverables
- Doubt-clearing support with the trainer after the batch ends
🎯 What you can do after this course
Produce a complete rigging study — padeye calculations, spreader beam sizing, sling and shackle selection, crane chart check and ground bearing pressure — in a pack a client or third-party reviewer will accept.
📋 How to Enrol
Add this course to your cart to reserve a seat, or talk to us first: 💬 WhatsApp Us | 📧 Email Us. New batches start every month and seats are limited to keep sessions interactive.
About Lifting & Rigging Engineer Training
Lifting & Rigging Engineer Training is a 3D-LABS Engineering course designed for engineers, technical professionals, and students. By the end of this course, you will be able to gain immediately applicable skills for your engineering work. The course combines live-cohort sessions (weekends) with self-paced material available 24/7.
Who Lifting & Rigging Engineer Training is for
Lifting & Rigging Engineer Training is designed for:
- Early-career engineers wanting to accelerate practical skills in the topic.
- Experienced engineers moving into a new domain or refreshing their working knowledge.
- Team leads wanting to level-set junior team members on a specific skill.
- Students preparing for professional roles in the discipline.
What is included
- Live-cohort sessions — weekend sessions with the instructor, 2 hours each, recorded for those who cannot attend live.
- Self-paced modules — recorded lessons, exercises, and reference material available 24/7 in your account.
- Project-based assessment — real-project deliverable at the end, not a multiple-choice quiz.
- Certificate of completion — verifiable online at 3d-labs.com/verify.
- 12 months of access — pace yourself, revisit material anytime within the access window.
- Access to spreadsheet library — course-relevant subset of the 621 3D-LABS engineering spreadsheets included at no extra cost.
Course structure and duration
Total duration: 6-12 weeks depending on scope. Each week: 2 hours live session + 3-5 hours self-paced material + 2-4 hours applied exercises. Total commitment: 7-11 hours per week. Compatible with a full-time job — most students work through the course alongside their day job.
Instructors
Lifting & Rigging Engineer Training is taught by senior 3D-LABS engineers with 10-20+ years of hands-on industry experience — not academics. Every technique taught has been used on real client projects. Instructor bios and previous course reviews are on the course page.
Pricing and enrolment
Lifting & Rigging Engineer Training is priced at ₹12,000 (USD equivalent shown in cart). Payment methods: Cashfree (India) or PayPal International. Corporate group discounts start at 3 enrolments. Enterprise licensing available — contact sales@3d-labs.com.
Related courses and services
- Browse all 19 online courses across software, discipline, and career tracks.
- For hands-on project support beyond training, see our engineering services.
- Complement your learning with our 115 engineering e-books.
- Access 680 engineering spreadsheets for practice and reference.
Frequently asked questions
How is Lifting & Rigging Engineer Training delivered?
Lifting & Rigging Engineer Training combines live-cohort sessions with self-paced material. Live sessions run on weekends (2 hours, IST time zone) and are recorded for those who cannot attend live. Self-paced material — recorded lessons, exercises, and reference documents — is available in your account 24/7.
What is the course duration?
Typical duration: 4 weeks. You have 12 months of access from purchase, so you can pace yourself. Live cohort sessions run in defined 4 week windows — you can join the current cohort or wait for the next one.
Do I get a certificate?
Yes. After completing all lessons and passing the final assessment (typically a project deliverable, not a multiple-choice quiz), you receive a certificate of completion from 3D-LABS. The certificate is verifiable online at 3d-labs.com/verify.
Who teaches the course?
Courses are taught by senior 3D-LABS engineers with 10-20+ years of industry experience. Instructor bios are on the course page. This is applied engineering practice from working engineers, not academic theory.
What if the course does not meet my expectations?
7-day satisfaction guarantee. If you have attended the first live session or completed the first module of self-paced material and are not satisfied, email us within 7 days for a full refund. After 7 days, refunds are pro-rated based on material accessed.
About 3D-LABS training
Lifting & Rigging Engineer Training is one of 19 online courses from 3D-LABS — engineering training built by working engineers, taught with real project deliverables, and priced for the Indian market with global relevance. Since 2003, we have trained thousands of engineers across pressure vessel design, piping stress, structural design, CAESAR II, STAAD.Pro, and other software and disciplines.
Browse the full training catalogue.
