Description
Control Valve Cv Sizing: Gas (Choked / Non-choked) β method, governing standards and output schedule
The Control Valve Cv Sizing: Gas (Choked / Non-choked) calculation determines the flow coefficient or bore required to pass a specified flow at the available differential pressure, and screens the selection for choked flow, cavitation and noise. It is applied during detailed design, during design verification by a second engineer, and again during in-service assessment when the operating basis changes. Because every intermediate quantity is reported rather than only the final answer, the calculation can be checked line by line against the governing standard without re-deriving it.
This 3D-LABS workbook is built to IEC 60534-2-1. You supply 5 inputs and the sheet reports 6 results, with every formula left visible so each figure can be traced to the clause it comes from.
Method of calculation
The appropriate liquid or gas sizing equation is applied with the piping geometry factor and, for gas service, the expansion factor and the terminal pressure-drop ratio xT to establish whether flow is choked. For liquids the cavitation index is compared with the manufacturer’s incipient and choked coefficients; for orifices the discharge coefficient and expansibility factor from the metering standard are used.
Governing standards and references
- IEC 60534-2-1 β IEC 60534-2-1 Industrial-process control valves – Sizing equations for incompressible and
- ISO 5167 β ISO 5167 Measurement of fluid flow by means of pressure differential devices
Each formula cites the clause it comes from on the same row as the result it produces, so a reviewer can check the sheet line by line against the standard.
Acceptance criteria
For the calculation to be reported as acceptable, the selected element must pass the maximum flow within the usable travel range while keeping the minimum-flow case above the controllable minimum, with cavitation indices and predicted noise below the specified limits.
Who uses this calculation
This calculation is used by instrumentation and process engineers preparing control valve and flow element data sheets, and reviewers checking vendor sizing output.
What you receive
- Excel calculation file (.xlsx) β fully unlocked formulas and a clear input/output layout
- Worked example β realistic engineering values with expected outputs so you can verify the sheet against a known case
- Code references β every formula cross-referenced to IEC 60534-2-1
- Email support β write to info@3d-labs.com with questions about inputs, methodology or results
Delivery and licence
Instant download after payment at βΉ3,699. One payment, lifetime access, no subscription. The workbook is a design aid β results must be verified by a qualified engineer before use.
What Control Valve Cv Sizing: Gas (Choked / Non-choked) β Excel Calculator calculates
Control Valve Cv Sizing: Gas (Choked / Non-choked) β Excel Calculator is an Excel-native engineering calculation tool built by 3D-LABS for mechanical, design, and equipment engineers working with pressure equipment, rotating machinery, and mechanical systems. It is used for sizing pressure vessels, heat exchangers, flanges, bolts, and other mechanical components. Every input is labelled and every output is traceable β the sheet is designed to be checkable, not a black box.
Codes and standards followed
Control Valve Cv Sizing: Gas (Choked / Non-choked) β Excel Calculator follows industry-standard Mechanical Engineering codes including ASME VIII Div 1 & 2, ASME B16.5, TEMA, API 660, HEI, EN 13445. Each formula is cross-referenced to the applicable code clause so your reviewer can trace calculations back to the standard.
If your project requires a different code base (e.g. converting an IS-code sheet to an ASME basis), we can produce a code-variant edition on request. Contact info@3d-labs.com for a variant quote.
What is included in your download
- The Excel calculation file (.xlsx) β fully unlocked formulas, cell-level comments, and a clear input/output layout.
- A sample worked example β realistic inputs plus expected outputs so you can validate the spreadsheet against a known case.
- User notes (PDF) β assumptions, code clauses referenced, and edge-case guidance.
- Revision history β every update to the spreadsheet is logged so you know what changed and when.
- Email support β reply within 24 hours (Monday to Saturday, IST) for questions about the spreadsheet or its use.
Software requirements
Control Valve Cv Sizing: Gas (Choked / Non-choked) β Excel Calculator runs in Microsoft Excel 2016 or later on Windows and Mac. It is also compatible with LibreOffice Calc and can be imported into Google Sheets (some formatting may shift). No macros are required and no external add-ins are needed β every calculation runs in cell formulas, which means every step is auditable.
Pricing and delivery
Control Valve Cv Sizing: Gas (Choked / Non-choked) β Excel Calculator is priced at βΉ3,699 (approximate USD equivalent shown in the cart). Delivery is instant β after payment you get a download link immediately and a receipt by email. One-time purchase, lifetime access, no subscriptions or hidden fees.
Payment methods: Cashfree (Indian customers) or PayPal International (customers outside India). Volume discounts are available on bundles of 5 or more spreadsheets from the same discipline β contact sales@3d-labs.com for a bundle quote.
Related tools and services
Engineers who work with Control Valve Cv Sizing: Gas (Choked / Non-choked) β Excel Calculator often also need:
- Other Mechanical Engineering spreadsheets from our catalogue of 119 tools in this discipline.
- Our Pressure Vessel Design Services β for projects where the calculation is only part of a larger scope and you want the full engineering deliverable produced by 3D-LABS.
- Our online training courses β instructor-led programmes on Mechanical Engineering topics, including software mastery and code walkthroughs.
- Our engineering e-book library β 115+ technical PDF references covering theory, practice, and code interpretation.
Frequently asked questions
What software do I need to run Control Valve Cv Sizing: Gas (Choked / Non-choked) β Excel Calculator?
The spreadsheet is delivered as a native Excel (.xlsx) file. It runs in Microsoft Excel 2016 or later on Windows and Mac. It also runs in LibreOffice Calc and Google Sheets (with import), though some formatting may shift. No macros are required β all logic runs in cell formulas so you can audit every step.
Which codes and standards does this spreadsheet follow?
Control Valve Cv Sizing: Gas (Choked / Non-choked) β Excel Calculator follows ASME VIII Div 1 & 2, ASME B16.5, TEMA, API 660, HEI, EN 13445. Every formula is cross-referenced to the code clause it implements, so your reviewer can trace the calculation back to the standard. If your project needs a different code, contact us β many spreadsheets are available in code-variant editions.
Are the formulas locked or editable?
All formulas are unlocked and editable. You can adapt inputs, add your own load combinations, integrate the sheet into your own workflow, and audit the logic. We do not password-protect our worksheets β an engineer should always be able to verify what the tool is doing.
What is included in the download?
The download includes: (1) the Excel calculation file with all formulas, (2) a sample worked example showing typical inputs and expected outputs, (3) a short user notes PDF explaining assumptions and code clauses used, and (4) a revision history so you can see how the sheet has been updated over time.
Do you offer support if I have questions?
Yes. Email support with any 3D-LABS spreadsheet purchase β reply within 24 hours (Mon-Sat, IST). We also offer paid tuning if you need the spreadsheet adapted to a specific project (typically USD 50-200 depending on scope). Contact info@3d-labs.com for details.
About 3D-LABS engineering spreadsheets
Control Valve Cv Sizing: Gas (Choked / Non-choked) β Excel Calculator is one of 680 engineering calculation spreadsheets in the 3D-LABS catalogue β the largest curated collection of code-compliant Excel calculators for practising engineers anywhere. Each sheet is built and reviewed by 3D-LABS engineers who use them daily on real client projects across pressure vessel design, storage tank design, piping stress analysis, structural engineering, heat exchanger design, and FEA services since 2003.
Browse the full SpreadSheet Calculations catalogue or the Mechanical Engineering calculations sub-category. Volume discounts apply on 5+ spreadsheets from the same discipline.
