Description
API 579 Part 5: Pitting Corrosion Assessment β method, governing standards and output schedule
The API 579 Part 5: Pitting Corrosion Assessment assesses whether a component containing measured metal loss, pitting or a crack-like flaw can remain in service at its current operating conditions, and determines the reduced maximum allowable working pressure where the flaw is not acceptable at full rating. It is applied during detailed design, during design verification by a second engineer, and again during in-service assessment when the operating basis changes. Because every intermediate quantity is reported rather than only the final answer, the calculation can be checked line by line against the governing standard without re-deriving it.
This 3D-LABS workbook is built to API 579-1/ASME FFS-1. You supply 11 inputs and the sheet reports 5 results, with every formula left visible so each figure can be traced to the clause it comes from.
Method of calculation
For local metal loss and pitting the remaining strength factor RSF is computed from the flaw geometry and compared with the allowable RSF, with the reduced MAWP following as MAWPΒ·RSF/RSFa where the flaw fails the Level 1 screening. For crack-like flaws the Failure Assessment Diagram approach is used: the stress intensity ratio Kr and the load ratio Lr are plotted against the FAD curve to establish the margin against both brittle fracture and plastic collapse.
Governing standards and references
- API 579-1/ASME FFS-1 β API 579-1/ASME FFS-1 Fitness-For-Service
Each formula cites the clause it comes from on the same row as the result it produces, so a reviewer can check the sheet line by line against the standard.
Acceptance criteria
For the calculation to be reported as acceptable, the calculated RSF must equal or exceed the allowable RSF at the operating pressure, or the pressure must be reduced accordingly; for crack-like flaws the assessment point must lie inside the FAD envelope with the required margin.
Who uses this calculation
This calculation is used by plant integrity and materials engineers, inspection contractors reporting anomalies, and engineering authorities approving continued operation.
What you receive
- Excel calculation file (.xlsx) β fully unlocked formulas and a clear input/output layout
- Worked example β realistic engineering values with expected outputs so you can verify the sheet against a known case
- Code references β every formula cross-referenced to API 579-1/ASME FFS-1
- Email support β write to info@3d-labs.com with questions about inputs, methodology or results
Delivery and licence
Instant download after payment at βΉ5,199. One payment, lifetime access, no subscription. The workbook is a design aid β results must be verified by a qualified engineer before use.
What API 579 Part 5: Pitting Corrosion Assessment β Excel Spreadsheet calculates
API 579 Part 5: Pitting Corrosion Assessment β Excel Spreadsheet is an Excel-native engineering calculation tool built by 3D-LABS for aerospace, defence, and propulsion engineers working with airframe structures, aerodynamic surfaces, and space systems. It is used for sizing structural components, calculating aerodynamic loads, verifying material margins, and modelling propulsion parameters. Every input is labelled and every output is traceable β the sheet is designed to be checkable, not a black box.
Codes and standards followed
API 579 Part 5: Pitting Corrosion Assessment β Excel Spreadsheet follows API 579. Each formula in the spreadsheet is cross-referenced to the specific code clause it implements β you can trace any calculation back to the underlying standard, which is essential for design review and regulatory sign-off.
If your project requires a different code base (e.g. converting an IS-code sheet to an ASME basis), we can produce a code-variant edition on request. Contact info@3d-labs.com for a variant quote.
What is included in your download
- The Excel calculation file (.xlsx) β fully unlocked formulas, cell-level comments, and a clear input/output layout.
- A sample worked example β realistic inputs plus expected outputs so you can validate the spreadsheet against a known case.
- User notes (PDF) β assumptions, code clauses referenced, and edge-case guidance.
- Revision history β every update to the spreadsheet is logged so you know what changed and when.
- Email support β reply within 24 hours (Monday to Saturday, IST) for questions about the spreadsheet or its use.
Software requirements
API 579 Part 5: Pitting Corrosion Assessment β Excel Spreadsheet runs in Microsoft Excel 2016 or later on Windows and Mac. It is also compatible with LibreOffice Calc and can be imported into Google Sheets (some formatting may shift). No macros are required and no external add-ins are needed β every calculation runs in cell formulas, which means every step is auditable.
Pricing and delivery
API 579 Part 5: Pitting Corrosion Assessment β Excel Spreadsheet is priced at βΉ5,199 (approximate USD equivalent shown in the cart). Delivery is instant β after payment you get a download link immediately and a receipt by email. One-time purchase, lifetime access, no subscriptions or hidden fees.
Payment methods: Cashfree (Indian customers) or PayPal International (customers outside India). Volume discounts are available on bundles of 5 or more spreadsheets from the same discipline β contact sales@3d-labs.com for a bundle quote.
Related tools and services
Engineers who work with API 579 Part 5: Pitting Corrosion Assessment β Excel Spreadsheet often also need:
- Other Aerospace Engineering spreadsheets from our catalogue of 27 tools in this discipline.
- Our FEA Services β for projects where the calculation is only part of a larger scope and you want the full engineering deliverable produced by 3D-LABS.
- Our online training courses β instructor-led programmes on Aerospace Engineering topics, including software mastery and code walkthroughs.
- Our engineering e-book library β 115+ technical PDF references covering theory, practice, and code interpretation.
Frequently asked questions
What software do I need to run API 579 Part 5: Pitting Corrosion Assessment β Excel Spreadsheet?
The spreadsheet is delivered as a native Excel (.xlsx) file. It runs in Microsoft Excel 2016 or later on Windows and Mac. It also runs in LibreOffice Calc and Google Sheets (with import), though some formatting may shift. No macros are required β all logic runs in cell formulas so you can audit every step.
Which codes and standards does this spreadsheet follow?
API 579 Part 5: Pitting Corrosion Assessment β Excel Spreadsheet follows API 579. Every formula is cross-referenced to the code clause it implements, so your reviewer can trace the calculation back to the standard. If your project needs a different code, contact us β many spreadsheets are available in code-variant editions.
Are the formulas locked or editable?
All formulas are unlocked and editable. You can adapt inputs, add your own load combinations, integrate the sheet into your own workflow, and audit the logic. We do not password-protect our worksheets β an engineer should always be able to verify what the tool is doing.
What is included in the download?
The download includes: (1) the Excel calculation file with all formulas, (2) a sample worked example showing typical inputs and expected outputs, (3) a short user notes PDF explaining assumptions and code clauses used, and (4) a revision history so you can see how the sheet has been updated over time.
Do you offer support if I have questions?
Yes. Email support with any 3D-LABS spreadsheet purchase β reply within 24 hours (Mon-Sat, IST). We also offer paid tuning if you need the spreadsheet adapted to a specific project (typically USD 50-200 depending on scope). Contact info@3d-labs.com for details.
About 3D-LABS engineering spreadsheets
API 579 Part 5: Pitting Corrosion Assessment β Excel Spreadsheet is one of 680 engineering calculation spreadsheets in the 3D-LABS catalogue β the largest curated collection of code-compliant Excel calculators for practising engineers anywhere. Each sheet is built and reviewed by 3D-LABS engineers who use them daily on real client projects across pressure vessel design, storage tank design, piping stress analysis, structural engineering, heat exchanger design, and FEA services since 2003.
Browse the full SpreadSheet Calculations catalogue or the Aerospace Engineering calculations sub-category. Volume discounts apply on 5+ spreadsheets from the same discipline.
