Table of contents

1.0 Introduction
2.0 Piping
2.1 Introduction
2.2 Piping and Instrumentation Nomenclature Components
2.3 Codes and Standards
2.3.1 The ASME B31 Piping Codes
2.3.2 The Dimensional standards
2.3.3 MS Standards
2.3.4 API
2.4 Material Selection
2.5 Code Considerations for Design
2.6 Thickness calculations under pressure
2.7 Flange Ratings
3.0 Equipments
3.1 Type of Equipments
3.2 Codes and Standards
3.3 Piping to vessels & columns
4.0 Pipe supports
4.1 Requirements of pipe supports
4.2 Types of pipe supports
4.3 Spacing of pipe support
5.0 Structural design
5.1 Codes and standards
5.2 Structural Design considerations
6.0 Design procedure of process skids
7.0 Samples

3D-LABS leading engineering firm since 2003, is proud to deliver industrial design training . We intend to deliver the best learning in experience.
This training is designed to prepare freshers for entry into a mechanical environment. Further training in the mechanical field would qualify the student as a mechanical
technician in world’s oil and gas industry.

Provides real time training on Engineering design and live projects on the following categories.

Category – A
1. Piping draftsman = 2 weeks = 2hrs/day
2. Piping design engineer
3. Piping stress engineer = 3 weeks = 2hrs/day
(2 and 3 are combined & cannot be taken separately)
= 4 weeks = 2hrs/day

Category – B
1. Structural draftsman = 2 weeks = 2hrs/day
2. Structural design engineer
3. Structural stress engineer = 3 weeks = 2hrs/day
(2 and 3 are combined & cannot be taken separately)
For 1, 2 & 3 = 4 weeks = 2hrs/day

Category – C
1. Pressure vessel draftsman = 3 weeks = 2hrs/day
2. Pressure vessel design engineer = 3 weeks = 2hrs/day
For 1 & 2 = 5 weeks = 2hrs/day

Category – D
1. Heat exchanger draftsman = 4 weeks = 2hrs/day
2. Heat exchanger design engineer = 3 weeks = 2hrs/day
For 1 & 2 = 6 weeks = 2hrs/day

Category – E
1. Storage tank draftsman = 4 weeks = 2hrs/day
2. Storage tank design engineer = 3 weeks = 2hrs/day
For 1 & 2 = 6 weeks = 2hrs/day

Category – F
1. Skid modelling engineer or Skid draftsman = 3 weeks = 2hrs/day
2. Skid design engineer = 3 weeks = 2hrs/day
For 1 & 2 = 6 weeks = 2hrs/day

Category – G
1. Software modeler for FEA = 3 weeks = 2hrs/day
2. FEA engineer = 3 weeks = 2hrs/day
For 1 & 2 = 6 weeks = 2hrs/day