Padeye Combined Stress (Von Mises) Calculation — Multi-Axis Excel

Description

This Padeye Combined Stress spreadsheet from 3D-LABS follows ASME standards and gives instant, checkable results for practising engineers — no manual derivation required.

Padeye Combined Stress (Von Mises) Calculation

This Padeye Combined Stress (Von Mises) Calculation — Multi-Axis Excel spreadsheet provides a complete, code-compliant engineering solution.

Engineering Spreadsheet — Instant Download

What This Spreadsheet Does

Evaluates the combined stress state in a padeye subject to multi-directional rigging loads — typical for offshore lifts where slings approach at non-vertical angles producing both in-plane and out-of-plane forces. Uses Von Mises yield criterion to check the combined stress against material yield.

What’s Inside the Excel File

• Inputs — padeye geometry, plate thickness, sling angles (azimuth + elevation), applied load, material yield strength
• Load resolution into Fx, Fy, Fz components
• Bending moment at base from out-of-plane load
• Stress components — σx, σy, σz, τxy, τyz, τxz
• Von Mises equivalent stress per σ_VM formula
• Utilization ratio against allowable (typically 0.6 Fy or 0.67 Fy depending on code)

Who This Is For

• Offshore lifting engineers
• Heavy lift planners with non-vertical slings
• Structural engineers verifying combined stress states
• EPC teams on subsea, offshore, and module installations

Codes & Standards Referenced

• Von Mises distortion energy yield criterion
• ASME BTH-1 — design factor approach
• DNV / Noble Denton lifting standards (philosophy)

How It Works

File Format & Compatibility

Microsoft Excel (.xlsx). Opens in Excel 2016+, Excel 365, Google Sheets. No macros, no locked cells.

What You Get After Payment

• ✅ Instant download (also emailed)
• ✅ Lifetime access
• ✅ Engineer email support
• ✅ 7-day refund if file fails to open

🌍 Trusted by engineers across 50+ countries · 📚 Part of 160+ engineering spreadsheets · 🛠 Support from qualified engineers

Frequently Asked Questions

Replaces FEA?
For complex padeye geometry or fatigue analysis, FEA is preferred. This sheet handles the common combined-stress check for standard padeye shapes.

What sling angle range?
Any angle from 0° (vertical) to whatever your rigging plan permits.

Custom version needed?
Request a custom quote, or see our FEA Services.

Related Spreadsheets

• Pad Eye Design Calculation
• Lifting Lug (Pinned) ASME BTH-1
• Skid Lifting Lug Rope-Angle
• 3D-LABS FEA Services

🚀 Ready to download?

Purchase now and get instant access to your spreadsheet.

📧 info@3d-labs.com | ☎ +91 9843511204 (IN) | ☎ +44 7418 355355 (UK)

What’s Included

An instant Excel download with the complete formula set, a worked numerical example, and reference to the governing standard — ready to adapt to your own project inputs.

Download the Padeye Combined Stress (Von Mises) Calculation — Multi-Axis Excel from 3D-LABS for instant, verifiable results.

You may also need: view all engineering spreadsheets from 3D-LABS.

Download the Padeye Combined Stress (Von Mises) Calculation — Multi-Axis Excel from 3D-LABS for instant, verifiable results.

What Padeye Combined Stress (Von Mises) Calculation — Multi-Axis Excel calculates

Padeye Combined Stress (Von Mises) Calculation — Multi-Axis Excel is an Excel-native engineering calculation tool built by 3D-LABS for engineers, designers, and technical consultants across disciplines. It is used for performing repeatable, verifiable engineering calculations that would otherwise require manual longhand work. Every input is labelled and every output is traceable — the sheet is designed to be checkable, not a black box.

Codes and standards followed

Padeye Combined Stress (Von Mises) Calculation — Multi-Axis Excel follows industry-standard Engineering codes including ASME, API, AWWA, TEMA, IS, EN, AISC, ACI, and other industry-standard codes. Each formula is cross-referenced to the applicable code clause so your reviewer can trace calculations back to the standard.

If your project requires a different code base (e.g. converting an IS-code sheet to an ASME basis), we can produce a code-variant edition on request. Contact info@3d-labs.com for a variant quote.

What is included in your download

• The Excel calculation file (.xlsx) — fully unlocked formulas, cell-level comments, and a clear input/output layout.
• A sample worked example — realistic inputs plus expected outputs so you can validate the spreadsheet against a known case.
• User notes (PDF) — assumptions, code clauses referenced, and edge-case guidance.
• Revision history — every update to the spreadsheet is logged so you know what changed and when.
• Email support — reply within 24 hours (Monday to Saturday, IST) for questions about the spreadsheet or its use.

Software requirements

Padeye Combined Stress (Von Mises) Calculation — Multi-Axis Excel runs in Microsoft Excel 2016 or later on Windows and Mac. It is also compatible with LibreOffice Calc and can be imported into Google Sheets (some formatting may shift). No macros are required and no external add-ins are needed — every calculation runs in cell formulas, which means every step is auditable.

Pricing and delivery

Padeye Combined Stress (Von Mises) Calculation — Multi-Axis Excel is priced at ₹999 (approximate USD equivalent shown in the cart). Delivery is instant — after payment you get a download link immediately and a receipt by email. One-time purchase, lifetime access, no subscriptions or hidden fees.

Payment methods: Cashfree (Indian customers) or PayPal International (customers outside India). Volume discounts are available on bundles of 5 or more spreadsheets from the same discipline — contact sales@3d-labs.com for a bundle quote.

Related tools and services

Engineers who work with Padeye Combined Stress (Von Mises) Calculation — Multi-Axis Excel often also need:

• Other Engineering spreadsheets from our catalogue of 621 tools in this discipline.
• Our Engineering Design Services — for projects where the calculation is only part of a larger scope and you want the full engineering deliverable produced by 3D-LABS.
• Our online training courses — instructor-led programmes on Engineering topics, including software mastery and code walkthroughs.
• Our engineering e-book library — 115+ technical PDF references covering theory, practice, and code interpretation.

Frequently asked questions

What software do I need to run Padeye Combined Stress (Von Mises) Calculation — Multi-Axis Excel?

The spreadsheet is delivered as a native Excel (.xlsx) file. It runs in Microsoft Excel 2016 or later on Windows and Mac. It also runs in LibreOffice Calc and Google Sheets (with import), though some formatting may shift. No macros are required — all logic runs in cell formulas so you can audit every step.

Which codes and standards does this spreadsheet follow?

Padeye Combined Stress (Von Mises) Calculation — Multi-Axis Excel follows ASME, API, AWWA, TEMA, IS, EN, AISC, ACI, and other industry-standard codes. Every formula is cross-referenced to the code clause it implements, so your reviewer can trace the calculation back to the standard. If your project needs a different code, contact us — many spreadsheets are available in code-variant editions.

Are the formulas locked or editable?

All formulas are unlocked and editable. You can adapt inputs, add your own load combinations, integrate the sheet into your own workflow, and audit the logic. We do not password-protect our worksheets — an engineer should always be able to verify what the tool is doing.

What is included in the download?

The download includes: (1) the Excel calculation file with all formulas, (2) a sample worked example showing typical inputs and expected outputs, (3) a short user notes PDF explaining assumptions and code clauses used, and (4) a revision history so you can see how the sheet has been updated over time.

Do you offer support if I have questions?

Yes. Email support with any 3D-LABS spreadsheet purchase — reply within 24 hours (Mon-Sat, IST). We also offer paid tuning if you need the spreadsheet adapted to a specific project (typically USD 50-200 depending on scope). Contact info@3d-labs.com for details.

About 3D-LABS engineering spreadsheets

Padeye Combined Stress (Von Mises) Calculation — Multi-Axis Excel is one of 621 engineering calculation spreadsheets in the 3D-LABS catalogue — the largest curated collection of code-compliant Excel calculators for practising engineers anywhere. Each sheet is built and reviewed by 3D-LABS engineers who use them daily on real client projects across pressure vessel design, storage tank design, piping stress analysis, structural engineering, heat exchanger design, and FEA services since 2003.

Browse the full SpreadSheet Calculations catalogue or the Engineering calculations sub-category. Volume discounts apply on 5+ spreadsheets from the same discipline.