Description
🎓 PV Elite and Pressure Vessel Design Training — live online training from 3D-LABS, taught by practising design engineers who build the calculators and software used on EPC projects every day.
⏱ Duration: 5 weeks · 🕑 Schedule: 2 hrs/day, weekday or weekend batches · 📶 Level: Intermediate · 💻 Mode: Live online, every session recorded
👷 Who this course is for
Mechanical and static equipment engineers who design or review pressure vessels, fabrication engineers checking vendor calculations, and graduates targeting static equipment roles.
📚 Course structure
- ASME Section VIII Div 1 essentials — Scope, design pressure and temperature, allowable stress, joint efficiency and corrosion allowance.
- Shell and head design — Cylindrical and conical shells, ellipsoidal, torispherical and hemispherical heads, internal and external pressure.
- PV Elite modelling — Building a vessel model, element data, materials and load cases, and analysis settings.
- Nozzle design and reinforcement — Area replacement, nozzle reinforcement pads, large nozzle rules and nozzle load checks.
- Flanges and bolted joints — Appendix 2 flange design, gasket selection, bolt load and flange rigidity checks.
- Supports — Saddle design to Zick analysis, skirt and lug supports, leg supports and base ring design.
- External loads — Wind and seismic analysis, vessel stability, and combined load case evaluation.
- Heat exchanger and special cases — Tubesheet checks, jacketed vessels, and when Div 2 or FEA becomes necessary.
- Fabrication and inspection interface — Weld details, NDE requirements, hydrotest pressure and nameplate data.
- Reporting — Design calculation reports, GA drawing inputs, and how a client reviews a vessel package.
🧮 3D-LABS calculators and software you will use
Every module is taught against real design sheets from our library of 680+ engineering calculators and our in-house software (PV Master) — you keep access to them and can use them on the job from day one.
- Shell and head thickness to ASME VIII Div 1
- Nozzle reinforcement area replacement
- Appendix 2 flange design
- Saddle support and Zick stress analysis
- Skirt support and base ring design
- Wind and seismic load on vertical vessels
- Hydrotest pressure and MAWP check
- Tubesheet thickness check
🖥 Tools, codes and standards covered
ASME Section VIII Div 1 with Div 2 awareness, ASME Section II Part D, TEMA for exchanger cases, IS 875 and ASCE 7 wind and seismic loading, and PV Elite workflow throughout.
📦 What is included
- Certificate of completion issued by 3D-LABS
- Lifetime access to course notes and session recordings
- Working calculators and templates used in class
- A guided mini-project with reviewed deliverables
- Doubt-clearing support with the trainer after the batch ends
🎯 What you can do after this course
Produce a complete vessel design package — thickness calculations, nozzle reinforcement, flange design, support and stability checks — and justify every number against the code clause it comes from.
📋 How to Enrol
Add this course to your cart to reserve a seat, or talk to us first: 💬 WhatsApp Us | 📧 Email Us. New batches start every month and seats are limited to keep sessions interactive.
About PV Elite and Pressure Vessel Design Training
PV Elite and Pressure Vessel Design Training is a 3D-LABS Software Mastery course designed for engineers wanting hands-on mastery of industry-standard engineering software. By the end of this course, you will be able to produce production-quality output in the software from day one on a real project. The course combines live-cohort sessions (weekends) with self-paced material available 24/7.
Who PV Elite and Pressure Vessel Design Training is for
PV Elite and Pressure Vessel Design Training is designed for:
- Early-career engineers wanting to accelerate practical skills in the topic.
- Experienced engineers moving into a new domain or refreshing their working knowledge.
- Team leads wanting to level-set junior team members on a specific skill.
- Students preparing for professional roles in the discipline.
What is included
- Live-cohort sessions — weekend sessions with the instructor, 2 hours each, recorded for those who cannot attend live.
- Self-paced modules — recorded lessons, exercises, and reference material available 24/7 in your account.
- Project-based assessment — real-project deliverable at the end, not a multiple-choice quiz.
- Certificate of completion — verifiable online at 3d-labs.com/verify.
- 12 months of access — pace yourself, revisit material anytime within the access window.
- Access to spreadsheet library — course-relevant subset of the 621 3D-LABS engineering spreadsheets included at no extra cost.
Course structure and duration
Total duration: 6-12 weeks depending on scope. Each week: 2 hours live session + 3-5 hours self-paced material + 2-4 hours applied exercises. Total commitment: 7-11 hours per week. Compatible with a full-time job — most students work through the course alongside their day job.
Instructors
PV Elite and Pressure Vessel Design Training is taught by senior 3D-LABS engineers with 10-20+ years of hands-on industry experience — not academics. Every technique taught has been used on real client projects. Instructor bios and previous course reviews are on the course page.
Pricing and enrolment
PV Elite and Pressure Vessel Design Training is priced at ₹9,600 (USD equivalent shown in cart). Payment methods: Cashfree (India) or PayPal International. Corporate group discounts start at 3 enrolments. Enterprise licensing available — contact sales@3d-labs.com.
Related courses and services
- Browse all 19 online courses across software, discipline, and career tracks.
- For hands-on project support beyond training, see our engineering services.
- Complement your learning with our 115 engineering e-books.
- Access 686 engineering spreadsheets for practice and reference.
Frequently asked questions
How is PV Elite and Pressure Vessel Design Training delivered?
PV Elite and Pressure Vessel Design Training combines live-cohort sessions with self-paced material. Live sessions run on weekends (2 hours, IST time zone) and are recorded for those who cannot attend live. Self-paced material — recorded lessons, exercises, and reference documents — is available in your account 24/7.
What is the course duration?
Typical duration: 5 weeks. You have 12 months of access from purchase, so you can pace yourself. Live cohort sessions run in defined 5 week windows — you can join the current cohort or wait for the next one.
Do I get a certificate?
Yes. After completing all lessons and passing the final assessment (typically a project deliverable, not a multiple-choice quiz), you receive a certificate of completion from 3D-LABS. The certificate is verifiable online at 3d-labs.com/verify.
Who teaches the course?
Courses are taught by senior 3D-LABS engineers with 10-20+ years of industry experience. Instructor bios are on the course page. This is applied engineering practice from working engineers, not academic theory.
What if the course does not meet my expectations?
7-day satisfaction guarantee. If you have attended the first live session or completed the first module of self-paced material and are not satisfied, email us within 7 days for a full refund. After 7 days, refunds are pro-rated based on material accessed.
About 3D-LABS training
PV Elite and Pressure Vessel Design Training is one of 19 online courses from 3D-LABS — engineering training built by working engineers, taught with real project deliverables, and priced for the Indian market with global relevance. Since 2003, we have trained thousands of engineers across pressure vessel design, piping stress, structural design, CAESAR II, STAAD.Pro, and other software and disciplines.
Browse the full training catalogue.
